926
edits
Changes
Jump to navigation
Jump to search
initial page creation
== Overview ==
VFDs marketed by Saftronics, but are actually rebranded Yaskawa GPD 506/P5 drives.
== Software ==
InverterWin is capable of communicating with the VFD over RS-232. A Yaskawa UWR00103-1 cable adapts a DB9 cable to the Hirose header that the interface panel normally mates with.
[https://www.yaskawa.com/delegate/getAttachment?documentId=TM.IW.01&cmd=documents&documentName=TM.IW.01.pdf Yaskawa InverterWin REV 3.0 User's Manual (TM.IW.01)]
[https://www.yaskawa.com/downloads/search-index/details?showType=details&docnum=InverterWin%203.0 InverterWin 3.0 Single File Install - Yaskawa] (InverterWin connects via a Yaskawa UWR00103-1 RS-232 adapter cable)
[https://www.yaskawa.com/delegate/getAttachment?documentId=WD.DW.05&cmd=documents&documentName=WD.DW.05.pdf Yaskawa PC to Drive Connection Cable UWR00468-2 and UWR00103-1 Wiring Diagram (WD.DW.05, 05/23/2011)]
== Modbus control ==
=== VFD parameters ===
* [http://www.efesotomasyon.com/html/control_techniques/027-2005F%20GP5%20Manual.pdf#page=41 Page 41] of the Saftronics PDF also lists all the VFD parameters.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4506&cmd=documents&openNewTab=true&documentName=TM4506.pdf#page=128 Page 128] (A1-1 in the PDF) of the Yaskawa manual lists all the VFD parameters.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=16 Page 16] (5-1 in the PDF) of the RTU manual explains the Modbus specific parameters.
{| class="wikitable"
! No.
! Value
! Description
|-
| n002
| 5: Op Terminal / Ref Serial com
| Operation mode select
|-
| n103
| 0: time over detection disabled
| MODBUS time over detection
|-
| n104
| 3: continue operation (alarm)
| MODBUS stop method at communication error
|-
| n105
| 0: 0.1Hz
| MODBUS frequency reference unit
|-
| n106
| 1
| MODBUS slave address
|-
| n107
| 2: 9,600 baud
| MODBUS BPS selection
|-
| n108
| 1: even parity
| MODBUS parity selection
|}
=== Modbus registers ===
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=35 Page 35] (7-2 in the PDF) of the RTU manual lists the "Simulatenous Broadcast" (write only) registers.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=36 Page 36] (7-3 in the PDF) of the RTU manual lists the "Command" (read/write) registers.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=37 Page 37] (7-4 in the PDF) of the RTU manual lists the "Monitor" (read only) registers.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=41 Page 41] (7-8 in the PDF) of the RTU manual lists the "Drive Parameter" (read/write) registers.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=53 Page 53] (7-20 in the PDF) of the RTU manual lists the "Special" (read/write) registers.
=== mbpoll ===
<code>mbpoll</code> commands:
<pre># fault reset
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 1 -t 4:int -- 8
# set forward run
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 1 -t 4:int -- 1
# set reverse run
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 1 -t 4:int -- 3
# set the output frequency (Hz*10, 1003 means 100.3Hz)
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 2 -t 4:int -- 1000
# monitor frequency command (Hz*10, 1003 means 100.3Hz)
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 0x23
# monitor current output (amps * 10, 53 means 5.3A)
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 0x27
# monitor current output (volts)
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 0x28
</pre>
== Online Resources ==
[http://www.efesotomasyon.com/html/control_techniques/027-2005F%20GP5%20Manual.pdf Saftronics FP5/GP5 Series User's Manual]
[https://www.yaskawa.com/delegate/getAttachment?documentId=TM4506&cmd=documents&openNewTab=true&documentName=TM4506.pdf Yaskawa GPD 506/P5 Technical Manual (TM4506)]
[https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf Yaskawa GPD 506 / Modbus RTU Technical Manual (TM.4026)]
[https://www.manualslib.com/download/1257334/Yaskawa-Gpd-506-P5.html Yaskawa GPD 506 / Modbus RTU Technical Manual] (alternate, must complete captcha)
[https://www.yaskawa.com/delegate/getAttachment?documentId=TOE-C736-40.15&cmd=documents&documentName=TOE-C736-40.15%20SI-K2P%20Instruction%20Manual.pdf Yaskawa Varispeed-616PC5/P5 Option Card RS-232C/485 Interface Card SI-K2/P Instructions (TOE-C736-40.15)]
VFDs marketed by Saftronics, but are actually rebranded Yaskawa GPD 506/P5 drives.
== Software ==
InverterWin is capable of communicating with the VFD over RS-232. A Yaskawa UWR00103-1 cable adapts a DB9 cable to the Hirose header that the interface panel normally mates with.
[https://www.yaskawa.com/delegate/getAttachment?documentId=TM.IW.01&cmd=documents&documentName=TM.IW.01.pdf Yaskawa InverterWin REV 3.0 User's Manual (TM.IW.01)]
[https://www.yaskawa.com/downloads/search-index/details?showType=details&docnum=InverterWin%203.0 InverterWin 3.0 Single File Install - Yaskawa] (InverterWin connects via a Yaskawa UWR00103-1 RS-232 adapter cable)
[https://www.yaskawa.com/delegate/getAttachment?documentId=WD.DW.05&cmd=documents&documentName=WD.DW.05.pdf Yaskawa PC to Drive Connection Cable UWR00468-2 and UWR00103-1 Wiring Diagram (WD.DW.05, 05/23/2011)]
== Modbus control ==
=== VFD parameters ===
* [http://www.efesotomasyon.com/html/control_techniques/027-2005F%20GP5%20Manual.pdf#page=41 Page 41] of the Saftronics PDF also lists all the VFD parameters.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4506&cmd=documents&openNewTab=true&documentName=TM4506.pdf#page=128 Page 128] (A1-1 in the PDF) of the Yaskawa manual lists all the VFD parameters.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=16 Page 16] (5-1 in the PDF) of the RTU manual explains the Modbus specific parameters.
{| class="wikitable"
! No.
! Value
! Description
|-
| n002
| 5: Op Terminal / Ref Serial com
| Operation mode select
|-
| n103
| 0: time over detection disabled
| MODBUS time over detection
|-
| n104
| 3: continue operation (alarm)
| MODBUS stop method at communication error
|-
| n105
| 0: 0.1Hz
| MODBUS frequency reference unit
|-
| n106
| 1
| MODBUS slave address
|-
| n107
| 2: 9,600 baud
| MODBUS BPS selection
|-
| n108
| 1: even parity
| MODBUS parity selection
|}
=== Modbus registers ===
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=35 Page 35] (7-2 in the PDF) of the RTU manual lists the "Simulatenous Broadcast" (write only) registers.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=36 Page 36] (7-3 in the PDF) of the RTU manual lists the "Command" (read/write) registers.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=37 Page 37] (7-4 in the PDF) of the RTU manual lists the "Monitor" (read only) registers.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=41 Page 41] (7-8 in the PDF) of the RTU manual lists the "Drive Parameter" (read/write) registers.
* [https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf#page=53 Page 53] (7-20 in the PDF) of the RTU manual lists the "Special" (read/write) registers.
=== mbpoll ===
<code>mbpoll</code> commands:
<pre># fault reset
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 1 -t 4:int -- 8
# set forward run
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 1 -t 4:int -- 1
# set reverse run
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 1 -t 4:int -- 3
# set the output frequency (Hz*10, 1003 means 100.3Hz)
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 2 -t 4:int -- 1000
# monitor frequency command (Hz*10, 1003 means 100.3Hz)
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 0x23
# monitor current output (amps * 10, 53 means 5.3A)
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 0x27
# monitor current output (volts)
./mbpoll /dev/ttyUSB0 -b 9600 -s 1 -P even -a 1 -0 -r 0x28
</pre>
== Online Resources ==
[http://www.efesotomasyon.com/html/control_techniques/027-2005F%20GP5%20Manual.pdf Saftronics FP5/GP5 Series User's Manual]
[https://www.yaskawa.com/delegate/getAttachment?documentId=TM4506&cmd=documents&openNewTab=true&documentName=TM4506.pdf Yaskawa GPD 506/P5 Technical Manual (TM4506)]
[https://www.yaskawa.com/delegate/getAttachment?documentId=TM4026&cmd=documents&documentName=TM4026.pdf Yaskawa GPD 506 / Modbus RTU Technical Manual (TM.4026)]
[https://www.manualslib.com/download/1257334/Yaskawa-Gpd-506-P5.html Yaskawa GPD 506 / Modbus RTU Technical Manual] (alternate, must complete captcha)
[https://www.yaskawa.com/delegate/getAttachment?documentId=TOE-C736-40.15&cmd=documents&documentName=TOE-C736-40.15%20SI-K2P%20Instruction%20Manual.pdf Yaskawa Varispeed-616PC5/P5 Option Card RS-232C/485 Interface Card SI-K2/P Instructions (TOE-C736-40.15)]