926
edits
Changes
Jump to navigation
Jump to search
Line 97:
Line 97: − +
Kollmorgen Goldline Series Servo Motors (view source)
Revision as of 11:40, 3 April 2022
, 11:40, 3 April 2022added front plate embossed part number
[https://www.mcmaster.com/9262K736/ Oil-Resistant Buna-N O-Ring, 2.5 mm Wide, 47 mm ID | McMaster-Carr]
[https://www.mcmaster.com/9262K736/ Oil-Resistant Buna-N O-Ring, 2.5 mm Wide, 47 mm ID | McMaster-Carr]
The bearing is pressed into the front face plate on the motor. This plate has an O-ring to seal a boss into a mating bore with a ~110.5mm final ID tapered step-down. That boss has a 108.5mm outer diameter, and the O-ring is ~2mm thick. The following might be suitable replacements:
The bearing is pressed into the front face plate on the motor, a casting embossed C-64180-4 and with C-64135 written in permanent marker (for the bearing?). This plate has an O-ring to seal a boss into a mating bore with a ~110.5mm final ID tapered step-down. That boss has a 108.5mm outer diameter, and the O-ring is ~2mm thick. The following might be suitable replacements:
[https://www.mcmaster.com/9262K874/ Oil-Resistant Buna-N O-Ring, 2 mm Wide, 109 mm ID | McMaster-Carr]
[https://www.mcmaster.com/9262K874/ Oil-Resistant Buna-N O-Ring, 2 mm Wide, 109 mm ID | McMaster-Carr]