Teknic ClearPath Integrated Servo Motors
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Overview
Brushless AC servo motors with integrated drives, which operate in position mode using step/direction digital signals similar to what stepper motor drives use.
Model Numbers
- Page 176 shows the part number key.
Wiring Diagram
- Page 43 shows the I/O connector pinout
- Page 35 shows the power connector pinout
- Page 10 shows how to test the power connector polarity
Status LED
- page 157 shows the "LED Blink Codes"
Software
ClearPath Motor Setup Program (MSP)
https://www.teknic.com/downloads/
Replacement Parts
Key
The motors have shafts that are 1/2" [12.7mm] in diameter with a 5mm wide keyslot that is 12mm long (NEMA 23) and 20mm long (NEMA 34) and 3mm deep. They are 3mm deep because a 5x5mm key would seat down 2.5mm, but an extra 0.5mm is given for clearance.