NEE AMC4 CNC Controller

From CNC Wiki
Revision as of 16:37, 22 June 2021 by Fdarling (talk | contribs) (added more links)
Jump to navigation Jump to search

Overview

A CNC controlled found driving older Onsrud CNC routers.

Replacement Parts

Connectors

Connector Label Original Part No. Similar Part Mating Cable End
Motors 17-14 position circular connector TE 213729-9
TE 1-213825-7
Thomas & Betts M1710-P14
Drives 23-37 position circular connector TE 2-208224-2
TE 1-213828-0
Thomas & Betts M2310-P37
Encoders DC-37 panel mount receptacle w/ female sockets Assmann A-DF 37 LL/Z
Serial
Inputs/Outputs DC-37 panel mount plug w/ male pins Assmann A-DS 37 LL/Z
Safety Control DIN (210 degrees) panel mount receptacle w/ female sockets Switchcraft 60HA4FX
Outputs Amphenol M33102A 14S-6S Amphenol 97-3102A-14S-6S
Analogue Outputs M1131-P04 / 1-1437726-2 TE 1-207825-5

Online Resources

AMC 4 | Burny Kaliburn (Wayback Machine)

AMC 4C2 | Burny Kaliburn (Wayback Machine)

AMC-B | Burny Kaliburn (Wayback Machine)

AMC WinAMC | Burny Kaliburn (Wayback Machine)

AMC Programming | Burny Kaliburn (Wayback Machine)

AMC Utilities | Burny Kaliburn (Wayback Machine)

NEE Controls Ltd AMC Controller Range Specification (December 2002) (dead link now)

AMC Specification (Wayback Machine)

AMC IO Capability (Wayback Machine)

Lockformer AMC4 Cutter Controller User Guide | Yumpu (Lockformer AMC4 Cutter Controller User Guide.pdf)

LOCKFORMER VULCAN 2900 OPERATOR'S MANUAL Pdf Download | ManualsLib

https://www.hweiss.com/media/wysiwyg/PartsLists/Vulcan2900_Operators_Manual_PP.pdf#page=63 (NEE controller interior)

Legacy Products of Lincoln Electric Cutting Solutions

Control | Kerf Developments | Supply a range of controllers and spare parts

CR Onsrud NEE AMC Controls Repair

NEE Controls Ltd company details from DPA Magazine

Motion Controllers and Machine Controllers from NEE (Wayback Machine)

Need Help! NEE - AMC Control on Onsrud Router

Commercial CNC Wood Routers > NEE - AMC Control on Onsrud Router (Michel Rigaud / rmetoile posted here too)

Looking for a copy of Burny/ITT WinAMC software for an AMC4 controllor/laser cutter

Help with post processor for NEE AMC4 CNC control for CR Onsrud CNC flatbed - Autodesk Community - HSM