Kollmorgen VFS5 Series Spindle Drives

From CNC Wiki
Revision as of 14:54, 18 November 2022 by Fdarling (talk | contribs) (added SRAM chip information)
Jump to navigation Jump to search
Kollmorgen VFS5-240-00-2031E

Overview

Spindle drive VFD with resolver/encoder feedback, meant for CNC applications where spindle orientation and speed regulation are important. It seems that it might be be a modified version of the BDS5 servo drive (the documentation would indicate they are very similar).

Wiring Diagram

  • Page 10 shows the overall BDS5 to PSR module wiring diagram, with C1/C2/C3/C4/C6 pinouts
  • Page 12 shows the C5 (RS-232/RS-485) connector wiring
  • Page 13 shows the C2 (customer I/O) connector wiring
  • Page 24 shows the C3 (resolver) connector wiring

Replacement Parts

Non-volatile SRAM Chip

Dallas DS1230Y-200IND+

Kollmorgen VFS5 Dallas DS1230Y-200IND.jpg

Analog Devices DS1230Y-200+ | DigiKey

Maxim DS1230Y-200+ | Mouser

PAL Chips

There are two different TI TIBPAL16R4-25CN chips:

Kollmorgen VFS5 TI TIBPAL16R4-25CN.jpg

Texas Instruments TIBPAL16R4-25CN | DigiKey

Power Lug Screws

M5-0.8x12mm SEMS screws with captive washers, similar to these:

Stainless Steel Pan Head Screws with Spring Lock Washer, M5 x 0.80 mm Thread, 12mm Long | McMaster-Carr

The spade/ring terminals must be less than ~16.1mm wide to fit between the barriers of the terminal block.

Online Resources

BDS5 Manual Addendum and VFS5 Spindle Drive Manual EN | Kollmorgen (download page)

Kollmorgen BDS5 Manual Addendum VFS-5 Spindle Drive Manual Old Number M94114 New Number MB 5007H

Kollmorgen MB 5007H (alternate source)

MotionLink Plus Software for BDS5 and VFS5 | Kollmorgen

https://www.naic.edu/~phil/mbeam/motor/motcontrol.pdf

https://www.kollmorgen.com/sites/default/files/public_downloads/VectorStar_Installation-User-Manual_en-US_RevA_0.pdf

KOLLMORGEN BDS4/5 – CNC_Principle_Repair

Cincinnati Parts 1267721-140 (source for image)

https://hiscnc.com/wp-content/uploads/2018/02/Circuit-Diagram-of-VFS5.pdf