Difference between revisions of "Kollmorgen VFS5 Series Spindle Drives"
(added PAL chip information) |
(added SRAM chip information) |
||
| Line 13: | Line 13: | ||
== Replacement Parts == | == Replacement Parts == | ||
| + | |||
| + | === Non-volatile SRAM Chip === | ||
| + | |||
| + | Dallas DS1230Y-200IND+ | ||
| + | |||
| + | [[File:Kollmorgen_VFS5_Dallas_DS1230Y-200IND.jpg|thumb|none]] | ||
| + | |||
| + | [https://www.digikey.com/en/products/detail/analog-devices-inc-maxim-integrated/DS1230Y-200/1087558 Analog Devices DS1230Y-200+ | DigiKey] | ||
| + | |||
| + | [https://www.mouser.com/ProductDetail/Maxim-Integrated/DS1230Y-200%2B?qs=0Y9aZN%252BMVCWS3A%252BBDB3DnA%3D%3D Maxim DS1230Y-200+ | Mouser] | ||
=== PAL Chips === | === PAL Chips === | ||
| Line 19: | Line 29: | ||
[[File:Kollmorgen_VFS5_TI_TIBPAL16R4-25CN.jpg|thumb|none]] | [[File:Kollmorgen_VFS5_TI_TIBPAL16R4-25CN.jpg|thumb|none]] | ||
| + | |||
| + | [https://www.digikey.com/en/products/detail/texas-instruments/TIBPAL16R4-25CN/1674249 Texas Instruments TIBPAL16R4-25CN | DigiKey] | ||
=== Power Lug Screws === | === Power Lug Screws === | ||
Revision as of 14:54, 18 November 2022
Overview
Spindle drive VFD with resolver/encoder feedback, meant for CNC applications where spindle orientation and speed regulation are important. It seems that it might be be a modified version of the BDS5 servo drive (the documentation would indicate they are very similar).
Wiring Diagram
- Page 10 shows the overall BDS5 to PSR module wiring diagram, with C1/C2/C3/C4/C6 pinouts
- Page 12 shows the C5 (RS-232/RS-485) connector wiring
- Page 13 shows the C2 (customer I/O) connector wiring
- Page 24 shows the C3 (resolver) connector wiring
Replacement Parts
Non-volatile SRAM Chip
Dallas DS1230Y-200IND+
Analog Devices DS1230Y-200+ | DigiKey
PAL Chips
There are two different TI TIBPAL16R4-25CN chips:
Texas Instruments TIBPAL16R4-25CN | DigiKey
Power Lug Screws
M5-0.8x12mm SEMS screws with captive washers, similar to these:
The spade/ring terminals must be less than ~16.1mm wide to fit between the barriers of the terminal block.
Online Resources
BDS5 Manual Addendum and VFS5 Spindle Drive Manual EN | Kollmorgen (download page)
Kollmorgen BDS5 Manual Addendum VFS-5 Spindle Drive Manual Old Number M94114 New Number MB 5007H
Kollmorgen MB 5007H (alternate source)
MotionLink Plus Software for BDS5 and VFS5 | Kollmorgen
https://www.naic.edu/~phil/mbeam/motor/motcontrol.pdf
KOLLMORGEN BDS4/5 – CNC_Principle_Repair
Cincinnati Parts 1267721-140 (source for image)
https://hiscnc.com/wp-content/uploads/2018/02/Circuit-Diagram-of-VFS5.pdf