Yaskawa SGD Series Servo Drives

Revision as of 04:48, 17 September 2020 by Fdarling (talk | contribs) (added wiring links)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Yaskawa SGD-04AS stock photo

Overview

Servo drives made by Yaskawa.

Page 381 (page 371 in the PDF) tells the differences between the newer SGDA and the older SGD series SERVOPACKs.

Model Numbers

SGD-xxyS are for speed/torque mode, and SGD-xxxP are for position mode. The 'xx' has to do with the power, and the 'y' letter has to do with the voltage.

TODO manual link

Wiring Diagram

  • Page 37 (25 in the PDF) onward shows an overview of the wiring.
  • Page 172 (161 in the PDF) shows the 1CN/2CN pinouts.
  • Page 174 (163 in the PDF) shows the 2CN "encoder" pinout in more detail for incremental encoders.
  • Page 175 (164 in the PDF) shows the 2CN "encoder" pinout in more detail for absolute encoders.
  • Page 176 (165 in the PDF) shows the motor power screw terminals pinout.
  • Page 177 (166 in the PDF) shows the "digital operator" connector pinout.
  • Page 272 (261 in the PDF) shows the motor quick connector pinouts.
  • Page 293 (282 in the PDF) shows the motor quick connector pinouts (high wattage).
  • Page 299 (288 in the PDF)
  • Page 332 (321 in the PDF) shows the incremental encoder cable pin mapping.
  • Page 333 (322 in the PDF) shows the absolute encoder cable pin mapping.
  • Page 334 (323 in the PDF) shows the incremental encoder cable pin mapping w/ both connector part numbers.
  • Page 335 (324 in the PDF) shows the absolute encoder cable pin mapping w/ both connector part numbers.
  • Page 339 (328 in the PDF) shows the I/O breakout board.
  • Page 350 (339 in the PDF) shows the "operator" RS-232 pinout.

Software

It seems there is some old software called SVMON that can interact with the servo drive over a serial cable connected to the "Operator" DE9 connector:

SVMON Sigma I Servo Monitoring and Set-up software

SVMON35r4.zip (direct link)

SVMON Software User Manual]

SIE-S800-15.5.pdf (direct link)

The drive might be supported by SigmaWin software, since it supports the newer SGDA series which are very similar:

https://www.yaskawa.com/products/motion/sigma-5-servo-products/software-tools/sigmawinplus

https://www.yaskawa.com/products/motion/sigma-5-servo-products/software-tools

Replacement Parts

36-pin I/O Connector

Online Resources

Yaskawa Sigma Series SGM/SGMP Servomotors and SGDA Servopack User's Manual (TSE-S800-15C)

Using the Yaskawa Motors - Northwestern Mechatronics Wiki

Holding Brake Wiring Warning

Yaskawa Servopack 200/230V SGD-04AS | eBay (from eBay seller fazziosurplus)