Teknic ClearPath Integrated Servo Motors

Revision as of 18:45, 21 April 2020 by Fdarling (talk | contribs) (fixed indentation level)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Teknic ClearPath series stock photo

Overview

Brushless AC servo motors with integrated drives, which operate in position mode using step/direction digital signals similar to what stepper motor drives use.

Model Numbers

Wiring Diagram

  • Page 43 shows the I/O connector pinout
  • Page 35 shows the power connector pinout
  • Page 10 shows how to test the power connector polarity

Status LED

Software

ClearPath Motor Setup Program (MSP)

https://www.teknic.com/downloads/

Replacement Parts

Key

The motors have shafts that are 1/2" [12.7mm] in diameter with a 5mm wide keyslot that is 12mm long (NEMA 23) and 20mm long (NEMA 34) and 3mm deep. They are 3mm deep because a 5x5mm key would seat down 2.5mm, but an extra 0.5mm is given for clearance.

NEMA 23 drawing

NEMA 34 drawing

Online Resources

ClearPath - Teknic

Clear Path User Manual Models MCVC, MCPV, SDSK, SDHP NEMA 23 and NEMA 34 Frame Sizes Version 3.05 May 7, 2019