Sumitomo HF-430 Series VFDs
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Overview
VFD made by Sumitomo. It can be used to create 3-phase from single phase electricity of a similar voltage, but must be derated by half when doing so. R and T must be wired with S left out, this is important because the control circuitry draws power from 2 of the 3 phases.
Model Numbers
- Page 26 (2-12 in the PDF) gives a table of model numbers and specifications
- Page 130 (6-1 in the PDF) gives a table of model numbers and specifications
Wiring Diagram
- Page 19 (2-6-1 in the PDF) shows the general wiring
- Page 21 (2-7 in the PDF) gives a description of the terminals
- Page 24 (2-10 in the PDF) shows the power terminal block pinout
- Page 28 (2-14 in the PDF) shows the control terminal block pinout
Dimensions
- Page 131 (6-2 in the PDF) gives the dimensional diagram
Keypad
Operation
- Page 30 (3-1 in the PDF) explains how to use the keypad
- Page 34 (4-1 in the PDF) shows a diagram of the keypad and explanation of how to use it
Factory Reset
Page 16 of the pocket guide details how to factory reset the parameters.
Parameters
- Page 38 (4-5 in the PDF) gives a table of the parameters
Online Resources
Sumitomo HF-430 Series Operating and Maintenance Manual D1401E-3.2 (2010.06)
Sumitomo HF-430 Series Operating and Maintenance Manual DM1401E-2.10 (2011.04) (scanned)
Sumitomo HF430 AC Drive Pocket Guide
Sumitomo Speed Reducers & Gearmotors - AC Inverter HF430 (Wayback Machine)
HF430 AC FLUX VECTOR DRIVE (Wayback Machine)