Difference between revisions of "Sumitomo HF-430 Series VFDs"

From CNC Wiki
Jump to navigation Jump to search
(initial page creation)
(No difference)

Revision as of 14:37, 15 April 2020

Overview

VFD made by Sumitomo. It can be used to create 3-phase from single phase electricity of a similar voltage, but must be derated by half when doing so. R and T must be wired with S left out, this is important because the control circuitry draws power from 2 of the 3 phases.

Online Resources

Sumitomo HF-430 Series Operating and Maintenance Manual D1401E-3.2 (2010.06)

Sumitomo HF-430 Series Operating and Maintenance Manual DM1401E-2.10 (2011.04) (scanned)

Sumitomo HF430 AC Drive Pocket Guide