Open main menu
Home
Random
Log in
Settings
About CNC Wiki
Disclaimers
CNC Wiki
Search
Changes
← Older edit
Newer edit →
HP Compaq Elite 8300 Ultra-Slim Desktop PC
(view source)
Revision as of 22:17, 20 April 2019
1,106 bytes added
,
22:17, 20 April 2019
added RAM info
Line 44:
Line 44:
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)</pre>
01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)</pre>
+
+
== Upgrades ==
+
+
=== SSD ===
+
+
The computer supports a standard 2.5" hard drive, as well as an mSATA drive. TODO: find out the physical size of the mSATA drive.
+
+
The following inexpensive SSD works well:
+
+
[[File:Kingston_SA400S37_120G_Stock_Photo.jpg|64x64px]] [https://www.amazon.com/dp/B01N6JQS8C/ $19.99 -- Kingston 120GB A400 SSD 2.5" SATA 7MM 2.5-Inch SA400S37/120G]
+
+
=== RAM ===
+
+
[[File:Corsair_CMSO8GX3M2C1600C11_Stock_Photo.jpg|64x64px]] [https://www.amazon.com/dp/B00EKFH11C/ $44.99 -- Corsair CMSO8GX3M2C1600C11 8GB (2x4GB) 1600MHz PC3-12800 204-Pin DDR3 SODIMM Laptop Memory 1.35V]
+
+
The maximum RAM specifications:
+
+
* 8GB of RAM max (2x4GB)
+
* industry-standard 204-pin
+
* unbuffered non-ECC PC3-12800 DDR3-1600 MHz-compliant
+
* 1.5 volt DDR3-SDRAM SODIMMs (not 1.35V)
+
* CAS latency 11 DDR3 1600 MHz (11-11-11 timing)
+
* 512-Mbit, 1-Gbit, and 2-Gbit non-ECC memory technologies
+
* SODIMMs constructed with x8 and x16 devices; SODIMMs constructed with x4 SDRAM are not supported
+
+
Above specifications taken from [http://h10032.www1.hp.com/ctg/Manual/c03612798#page=226 Page 226] of the service manual.
== Replacement Parts ==
== Replacement Parts ==
Fdarling
Bureaucrats
,
Interface administrators
,
Administrators
933
edits