Difference between revisions of "LNC MW2200A CNC Controller"
Jump to navigation
Jump to search
(initial page creation) |
(No difference)
|
Revision as of 18:51, 20 December 2020
Overview
Chinese CNC controller meant for step/direction based systems. It does support encoder feedback, though often it isn't used.
Wiring Diagram
- Page 10 shows an overview of the controller's ports.
- Page 11 shows the manual pulse generator (MPG) connector pinout.
- Page 12 shows the axis connector pinout.
Dimensions
- Page 7 shows a dimensional diagram for the size of the controller.
- Page 8 shows a dimensional diagram for mounting the controller.
PDFs
Media:LNC_MW2200A_Hardware_Introduction.pdf