Kollmorgen BDS4 Series Servo Drives

From CNC Wiki
Revision as of 05:24, 16 November 2022 by Fdarling (talk | contribs) (added spade terminal maximum width)
Jump to navigation Jump to search
Kollmorgen BDS4A-220J-001-404D21P

Overview

Analog servo drives made by Kollmorgen, they seem to use resolvers rather than encoders though they can be configured to output quadrature.

Specifications

Page 65 (D-5 in the PDF) shows the specifications.

Model Numbers

Page 51 (B-3 in the PDF) shows the "BDS4 Model Number Scheme".

Wiring Diagram

  • Page 25 (2-8 in the PDF) shows the "C1 - Input/Output" connector pinout
  • Page 27 (2-10 in the PDF) shows the "C2" resolver connector pinout
  • Page 71 (E-2 in the PDF) shows the "32" simulated encoder output option pinout.
  • Page 58 (C-1 in the PDF) has the mating connector part numbers for making cables.

Replacement Parts

Simulated Encoder Connector

8-pin housing:

DigiKey Part WM23703-ND.jpg Molex 0039012085

Molex 0039012080 (would probably work equally well)

Crimps:

DigiKey Part WM2501-ND.jpg Molex 0039000039 (18-24 AWG, tin)

DigiKey Part WM2503-ND.jpg Molex 0039000047 (22-28 AWG, tin)

Power Lug Screws

Seemingly #6-32x1/4" combo screws, similar to these:

Pan Head Combination Phillips/Slotted Screws, 18-8 Stainless Steel, 6-32 Thread Size, 1/4" Long | McMaster-Carr

The spade/ring terminals must be less than ~8.6mm wide to fit between the barriers of the terminal block.

Online Resources

Kollmorgen BDS4 Series Installation and Setup Manual

Kollmorgen BDS4 Series Installation and Setup Manual (alternate link)

BDS4 Installation Manual | Kollmorgen