936
edits
Changes
Kollmorgen BDS4 Series Servo Drives (view source)
Revision as of 06:41, 7 March 2023
, 06:41, 7 March 2023added dimensions section
== Wiring Diagram ==
== Wiring Diagram ==
[https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=25 Page 25] (2-8 in the PDF) shows the "C1 - Input/Output" connector pinout
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=25 Page 25] (2-8 in the PDF) shows the "C1 - Input/Output" connector pinout
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=27 Page 27] (2-10 in the PDF) shows the "C2" resolver connector pinout
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=71 Page 71] (E-2 in the PDF) shows the "32" simulated encoder output option pinout.
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=58 Page 58] (C-1 in the PDF) has the mating connector part numbers for making cables.
== Dimensions ==
[https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=71 Page 71] (E-2 in the PDF) shows the "32" simulated encoder output option pinout.
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=83 Page 83] (F-5 in the PDF) shows the PSR-4/5 12 & 20 amp dimensions
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=84 Page 84] (F-6 in the PDF) shows the PSR4/5X-50,75,90 amp dimensions
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=86 Page 86] (F-8 in the PDF) shows the BDS4-55 amp dimensions
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=88 Page 88] (F-10 in the PDF) shows the BDS4A-30 & 40 amp dimensions
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=162 Page 162] (F-84 in the PDF) shows the BDS4A-3 & 6 amp dimensions
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=163 Page 163] (F-85 in the PDF) shows the BDS4A-20 amp dimensions
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=164 Page 164] (F-86 in the PDF) shows the BDS4A-10 amp dimensions
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=165 Page 165] (F-87 in the PDF) shows the BDS4, BDS5, and PSR4/5 mounting hole patterns
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=166 Page 166] (F-88 in the PDF) shows the BDS4, BDS5, and PSR4/5 mounting hole patterns
* [https://www.kollmorgen.com/sites/default/files/public_downloads/bds4install.pdf#page=168 Page 168] (F-90 in the PDF) shows the BDS4A, BDS5A, and PSR4/5A mounting hole patterns
== Replacement Parts ==
=== Simulated Encoder Connector ===
8-pin housing:
[[File:DigiKey_Part_WM23703-ND.jpg|64x64px]] [https://www.digikey.com/en/products/detail/molex/0039012085/930273 Molex 0039012085]
[https://www.digikey.com/en/products/detail/molex/0039012080/61382 Molex 0039012080] (would probably work equally well)
Crimps:
[[File:DigiKey_Part_WM2501-ND.jpg|64x64px]] [https://www.digikey.com/en/products/detail/molex/0039000039/61448 Molex 0039000039] (18-24 AWG, tin)
[[File:DigiKey_Part_WM2503-ND.jpg|64x64px]] [https://www.digikey.com/en/products/detail/molex/0039000047/61454 Molex 0039000047] (22-28 AWG, tin)
=== Power Lug Screws ===
Seemingly #6-32x1/4" combo screws, similar to these:
[https://www.mcmaster.com/90604A144/ Pan Head Combination Phillips/Slotted Screws, 18-8 Stainless Steel, 6-32 Thread Size, 1/4" Long | McMaster-Carr]
The spade/ring terminals must be less than ~8.6mm wide to fit between the barriers of the terminal block.
== Online Resources ==
== Online Resources ==