Changes
Jump to navigation
Jump to search
← Older edit
JST JGD-125C Water Cooled Spindle
(view source)
Revision as of 21:10, 23 May 2022
364 bytes added
,
21:10, 23 May 2022
updated O-ring information
Line 55:
Line 55:
=== O-rings ===
=== O-rings ===
−
Must fit within a
10mm OD 1mm deep
recess
with a 6mm ID hole for
water to pass through
. Maybe one of these?:
+
The top cap with the water inlets have
10mm OD 1mm deep
recesses
with a 6mm ID hole for
O-rings
. Maybe
for
one of these?:
* [https://www.mcmaster.com/1171N144/ Square-Profile Oil-Resistant Buna-N O-Ring, 1.5 mm Wide, 7 mm ID | McMaster-Carr]
* [https://www.mcmaster.com/1171N144/ Square-Profile Oil-Resistant Buna-N O-Ring, 1.5 mm Wide, 7 mm ID | McMaster-Carr]
Line 63:
Line 63:
* [https://www.mcmaster.com/1302N037/ Oil-Resistant Buna-N O-Ring, 1.8 mm Wide, 6 mm ID | McMaster-Carr]
* [https://www.mcmaster.com/1302N037/ Oil-Resistant Buna-N O-Ring, 1.8 mm Wide, 6 mm ID | McMaster-Carr]
* [https://www.mcmaster.com/9262K166/ Oil-Resistant Buna-N O-Ring, 2 mm Wide, 6 mm ID | McMaster-Carr]
* [https://www.mcmaster.com/9262K166/ Oil-Resistant Buna-N O-Ring, 2 mm Wide, 6 mm ID | McMaster-Carr]
+
+
The bearing housing portion of the spindle has 8mm OD 1mm deep recesses with 4mm ID holes for O-rings. Maybe for one of these?:
+
+
* [https://www.mcmaster.com/9262K627/ Oil-Resistant Buna-N O-Ring, 1.5 mm Wide, 4.5 mm ID | McMaster-Carr]
+
* [https://www.mcmaster.com/9262K163/ Oil-Resistant Buna-N O-Ring, 2 mm Wide, 4 mm ID | McMaster-Carr] (verified)
=== Fasteners ===
=== Fasteners ===
Fdarling
Bureaucrats
,
Interface administrators
,
Administrators
927
edits
Navigation menu
Personal tools
Log in
Namespaces
Page
Discussion
Variants
Views
Read
View source
View history
More
Search
Navigation
Main page
All pages
Recent changes
Random page
User list
Help about MediaWiki
Tools
Special pages
Printable version