Line 5: |
Line 5: |
| == Wiring == | | == Wiring == |
| | | |
− | Power inlet circular connector wiring: | + | Power inlet "WEIPU WS20" circular connector wiring: |
| | | |
| {| class="wikitable" | | {| class="wikitable" |
Line 23: |
Line 23: |
| | (ground) | | | (ground) |
| |} | | |} |
| + | |
| + | The spindle has male pins inside an externally threaded receptacle. |
| | | |
| == Replacement Parts == | | == Replacement Parts == |
Line 41: |
Line 43: |
| * 5.1mm thick (dust shield portion) | | * 5.1mm thick (dust shield portion) |
| * 4x 3.5mm holes 3mm deep on a 44mm diameter circle | | * 4x 3.5mm holes 3mm deep on a 44mm diameter circle |
| + | * must get past a 33.3mm diameter spindle nose before threading into place |
| | | |
| === Top Locknut === | | === Top Locknut === |
Line 52: |
Line 55: |
| === O-rings === | | === O-rings === |
| | | |
− | Must fit within a 10mm OD 1mm deep recess with a 6mm ID hole for water to pass through. Maybe one of these?:
| + | The top cap with the water inlets have 10mm OD 1mm deep recesses with a 6mm ID hole for O-rings. Maybe for one of these?: |
| | | |
| * [https://www.mcmaster.com/1171N144/ Square-Profile Oil-Resistant Buna-N O-Ring, 1.5 mm Wide, 7 mm ID | McMaster-Carr] | | * [https://www.mcmaster.com/1171N144/ Square-Profile Oil-Resistant Buna-N O-Ring, 1.5 mm Wide, 7 mm ID | McMaster-Carr] |
Line 60: |
Line 63: |
| * [https://www.mcmaster.com/1302N037/ Oil-Resistant Buna-N O-Ring, 1.8 mm Wide, 6 mm ID | McMaster-Carr] | | * [https://www.mcmaster.com/1302N037/ Oil-Resistant Buna-N O-Ring, 1.8 mm Wide, 6 mm ID | McMaster-Carr] |
| * [https://www.mcmaster.com/9262K166/ Oil-Resistant Buna-N O-Ring, 2 mm Wide, 6 mm ID | McMaster-Carr] | | * [https://www.mcmaster.com/9262K166/ Oil-Resistant Buna-N O-Ring, 2 mm Wide, 6 mm ID | McMaster-Carr] |
| + | |
| + | The bearing housing portion of the spindle has 8mm OD 1mm deep recesses with 4mm ID holes for O-rings. Maybe for one of these?: |
| + | |
| + | * [https://www.mcmaster.com/9262K627/ Oil-Resistant Buna-N O-Ring, 1.5 mm Wide, 4.5 mm ID | McMaster-Carr] |
| + | * [https://www.mcmaster.com/9262K163/ Oil-Resistant Buna-N O-Ring, 2 mm Wide, 4 mm ID | McMaster-Carr] (verified) |
| | | |
| === Fasteners === | | === Fasteners === |