Difference between revisions of "Huanyang HY Series VFDs"

From CNC Wiki
Jump to navigation Jump to search
(initial page creation)
 
(added stock photo)
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[[File:HuanYang_HY02D211B_Stock_Photo.jpg|thumb|HuanYang HY02D211B (stock photo)]]
 +
 
== Overview ==
 
== Overview ==
  
Line 24: Line 26:
  
 
[http://www.etech.net.au/Huanyang/HY%20Series%20Inverter%2020100627.pdf#page=11 Page 11] shows the description of the terminal blocks
 
[http://www.etech.net.au/Huanyang/HY%20Series%20Inverter%2020100627.pdf#page=11 Page 11] shows the description of the terminal blocks
 +
 +
Some models don't have two relay outputs, and the control terminal layout is different:
 +
 +
[https://bulkman3d.com/wp-content/uploads/2019/01/HY01D523B-VFD-Manual.pdf#page=8 Page 8] shows the description of the terminal blocks
 +
 +
== Modbus control ==
 +
 +
You must set the slave address to something valid (non-zero) and use some form of RTU mode instead of ASCII for most software stacks to communicate with the VFD:
 +
 +
{| class="wikitable"
 +
! Parameter
 +
! Default Value
 +
! Needed Value
 +
! Description
 +
|-
 +
| PD000
 +
| 1: parameter editing locked
 +
| 0: parameter editing unlocked
 +
| parameter editing lock
 +
|-
 +
| PD163
 +
| 0: invalid
 +
| 1: address of 1
 +
| slave address
 +
|-
 +
| PD164
 +
| 1: 9,600 baud
 +
| 1: 9,600 baud
 +
| baud rate
 +
|-
 +
| PD165
 +
| 0: ASCII,8N1
 +
| 3: RTU,8N1
 +
| ASCII vs RTU,data bits,parity,stop bits
 +
|}
 +
 +
[http://www.etech.net.au/Huanyang/HY%20Series%20Inverter%2020100627.pdf#page=60 page 60] describes the Modbus protocol
  
 
== Online Resources ==  
 
== Online Resources ==  
Line 30: Line 69:
  
 
https://www.exoror.com/datasheet/VFD.pdf
 
https://www.exoror.com/datasheet/VFD.pdf
 +
 +
https://bulkman3d.com/wp-content/uploads/2019/01/HY01D523B-VFD-Manual.pdf
 +
 +
https://www.nvcnc.net/wp-content/uploads/2021/06/HuanYang-VFD-Manual.pdf
 +
 +
http://www.jinlantrade.com/ebay/invertermanual.pdf
 +
 +
[https://web.archive.org/web/20160910091142/http://hy-dq.cn/Products_e.asp?classid=1 Produts | Hyria Electric Co, LTD (Wayback Machine)]
 +
 +
[https://web.archive.org/web/20110921032437/http://www.h-y.tw/ www.h-y.tw (Wayback Machine)]
 +
 +
[https://github.com/GilchristT/SpindleTalker2/releases Releases · GilchristT/SpindleTalker2]
 +
 +
[https://github.com/RobertOlechowski/Huanyang_VFD RobertOlechowski/Huanyang_VFD: All you have to know about Huanyang VFD]
 +
 +
[https://github.com/LinuxCNC/linuxcnc/tree/master/src/hal/user_comps/huanyang-vfd linuxcnc/src/hal/user_comps/huanyang-vfd at master · LinuxCNC/linuxcnc]
 +
 +
[https://github.com/machinekit/machinekit-hal/tree/master/src/hal/user_comps/huanyang-vfd machinekit-hal/src/hal/user_comps/huanyang-vfd at master · machinekit/machinekit-hal]
 +
 +
[https://gist.github.com/Bouni/803492ed0aab3f944066 Huanyang VFD RS485 commands (pseudo Modbus)]

Latest revision as of 19:06, 28 February 2024

HuanYang HY02D211B (stock photo)

Overview

Variable frequency drive for 3-phase spindle motors. They are found on eBay, Amazon, AliExpress, etc, typically marketed for Chinese water cooled spindles.

Model Numbers

Model Input Power Output Power
HY01D523B 1PH/3PH 220VAC±20% 50Hz/60Hz 3PH 0-220VAC 1.5kW 7A 0.5-400Hz
HY02D211B 3PH 110VAC±20% 50Hz±5Hz 3PH 0-110VAC 2.2kW 20A 0.5-400Hz

Page 4 shows the model number scheme

Wiring Diagram

Page 11 shows the description of the terminal blocks

Some models don't have two relay outputs, and the control terminal layout is different:

Page 8 shows the description of the terminal blocks

Modbus control

You must set the slave address to something valid (non-zero) and use some form of RTU mode instead of ASCII for most software stacks to communicate with the VFD:

Parameter Default Value Needed Value Description
PD000 1: parameter editing locked 0: parameter editing unlocked parameter editing lock
PD163 0: invalid 1: address of 1 slave address
PD164 1: 9,600 baud 1: 9,600 baud baud rate
PD165 0: ASCII,8N1 3: RTU,8N1 ASCII vs RTU,data bits,parity,stop bits

page 60 describes the Modbus protocol

Online Resources

Huan Yang HY Series Inverter User Manual

https://www.exoror.com/datasheet/VFD.pdf

https://bulkman3d.com/wp-content/uploads/2019/01/HY01D523B-VFD-Manual.pdf

https://www.nvcnc.net/wp-content/uploads/2021/06/HuanYang-VFD-Manual.pdf

http://www.jinlantrade.com/ebay/invertermanual.pdf

Produts | Hyria Electric Co, LTD (Wayback Machine)

www.h-y.tw (Wayback Machine)

Releases · GilchristT/SpindleTalker2

RobertOlechowski/Huanyang_VFD: All you have to know about Huanyang VFD

linuxcnc/src/hal/user_comps/huanyang-vfd at master · LinuxCNC/linuxcnc

machinekit-hal/src/hal/user_comps/huanyang-vfd at master · machinekit/machinekit-hal

Huanyang VFD RS485 commands (pseudo Modbus)