HALaser E1701M Motion Controller Card

Revision as of 19:43, 22 August 2022 by Fdarling (talk | contribs) (initial page creation)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Overview

German made control card "cape" on a BeagleBone Black. It can control up to 4 axes of stepper motors and has inputs for limit switches. It's designed to work with HALaser's software "BeamConstruct", usually along with a scanning head / laser control card.

Wiring Diagram

  • Page 16 shows the 20-pin IDC "Digi I/O" connector pinout

Online Resources

HALaser Systems - Laser Marking Engraving Etching and Cutting Software - Scanner Controller Cards - An Industry 4.0 Company

HALaser Systems E1701M Motion Controller Users Manual (2022)