DSP Automation A Series Brushed DC Analog Servo Drives

From CNC Wiki
Revision as of 22:38, 2 April 2024 by Fdarling (talk | contribs) (added connector information)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
A Series (stock photo)

Overview

Brushed DC servo drives operating off an analog setpoint for either velocity or torque (current). It needs tachometer feedback for velocity mode. Configured using potentiometers and jumpers.

Model Numbers

  • Page 14 (6 in the PDF) shows the model number scheme

Wiring Diagram

  • Page 19 (11 in the PDF) shows an overview of the connectors/jumpers
  • Page 19 (11 in the PDF) shows the J2 "Power" connector pinout
  • Page 21 (13 in the PDF) shows the J1 "I/O" connector pinout

Dimensions

  • Page 17 (9 in the PDF) shows the dimensions

Replacement Parts

Power Connector

Standard edition:

  • TODO

OEM edition:

  • 0.25" male quick disconnect terminals spaced 0.3" apart

I/O Connector

Drive male headers:

Standard edition:

Molex 0022053111 (right angle version)

OEM edition:

Molex 0022232111 (vertical version)

Mating cable connector:

Housing:

Molex 0022012111 (no locking ramp)

Molex 0022012117 (locking ramp)

Molex 0022013117 (locking ramp, edge guides)

Crimps:

Molex 0008510108

Online Resources

Analog Servo Drives - DSP Automation

DSP Automation A Series Analog Servo Drives Brochure (July 2009)

DSP Automation A Series Analog Servo Drives User's Manual (20006-A, 07/28/2009)

DSP Automation A Series Analog Servo Drives User's Manual (20006-A, 07/28/2009) (Wayback Machine)