936
edits
Changes
DMM DHT / DST Series Servo Motors (view source)
Revision as of 09:01, 8 October 2020
, 09:01, 8 October 2020added power cable DigiKey links
=== Power Connector ===
=== Power Connector ===
Motor pigtail housing:
[https://www.digikey.com/en/products/detail/jst-sales-america-inc/VLP-04V/1883065 JST VLP-04V]
Motor pigtail crimps:
[https://www.digikey.com/en/products/detail/jst-sales-america-inc/SVF-61T-P2-0/1883086 JST SVF-61T-P2.0]
Intermediate cable motor side housing:
[https://www.digikey.com/en/products/detail/jst-sales-america-inc/VLR-04V/1883071 JST VLR-04V]
Intermediate cable motor side crimps:
[https://www.digikey.com/en/products/detail/jst-sales-america-inc/SVM-61T-P2-0/1531035 JST SVM-61T-P2.0]
=== Encoder Connector ===
=== Encoder Connector ===
[https://www.digikey.com/product-detail/en/molex/0551000680/WM24410-ND/8269153 Molex 0551000680]
[https://www.digikey.com/product-detail/en/molex/0551000680/WM24410-ND/8269153 Molex 0551000680]
NOTE: [http://www.dmm-tech.com/Files/DYN4MS-ZM5-A18A.pdf#page=10 Page 10] of the DMM DYN4 user manual claims the part number for the intermediate cable drive side connector is a [https://www.digikey.com/product-detail/en/3m/36210-0100FD/3M6453-ND/1756879 3M 36210-0100FD], however that is a 10 pin connector not 6 pin.
== Online Resources ==
== Online Resources ==