ExtraTech PoleStar HP4 Controller: Difference between revisions
added partial bill of materials |
added connector and fastener information |
||
| Line 12: | Line 12: | ||
https://www.digikey.com/en/products/detail/intel/EP1C12F324C8N/763639 | https://www.digikey.com/en/products/detail/intel/EP1C12F324C8N/763639 | ||
== Replacement Parts == | |||
=== Connectors === | |||
{| class="wikitable" | |||
! Name | |||
! Part | |||
|- | |||
| E1,EK1 | |||
| [https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/206705-1/15598 TE 206705-1] | |||
|- | |||
| Drive 5-6 | |||
| [https://www.digikey.com/en/products/detail/amphenol-cs-commercial-products/L17DAFRDA15S/4884549 Amphenol L17DAFRDA15S] (similar) | |||
|- | |||
| L1 | |||
| [https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/206306-1/19379 TE 206306-1] | |||
|- | |||
| L2 | |||
| [https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/206838-1/19349 TE 206838-1] | |||
|- | |||
| Motor 1-4 | |||
| [https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/211398-1/241426 TE 211398-1] | |||
|} | |||
=== Fasteners === | |||
{| class="wikitable" | |||
! Quantity | |||
! Type | |||
|- | |||
| 2 | |||
| M3-0.5x5mm Button Head Socket Cap Screws | |||
|- | |||
| 19 | |||
| M4-0.7x6mm Socket Head Cap Screws | |||
|- | |||
| 16 | |||
| M4-0.7x12mm Button Head Socket Cap Screws | |||
|- | |||
| 20 | |||
| M4-0.7x12mm Flat Head Socket Cap Screws | |||
|} | |||
* 10x M4-0.7x6mm Socket Head Cap Screws for fastening the main motherboard to the bottom of the chassis | |||
* 1x M4-0.7x6mm Socket Head Cap Screws for fastening the "HDSP" board to the bottom of the chassis (if present) | |||
* 8x M4-0.7x6mm Socket Head Cap Screws for fastening the stepper driver modules to the side of the chassis | |||
* 1x M4-0.7x15mm stud for rectifier to mount to bottom of chassis | |||
* 4x M2.5-0.45x6mm studs for internally mounting the "EK1" CPC connector to the side of the chassis | |||
* 2x M3-0.5x5mm Button Head Socket Cap Screws for "AUX 1" blank | |||
* 4x M4-0.7x12mm Button Head Socket Cap Screws for "E1" CPC connector (they protrude 8mm, could use 6mm long screws) | |||
* 16x M4-0.7x12mm Flat Head Socket Cap Screws for "Motor 1-4" CPC connectors | |||
* 4x M4-0.7x12mm Flat Head Socket Cap Screws for "L1" CPC connector | |||
* 4x M4-0.7x12mm Button Head Socket Cap Screws for the "L2" CPC connector | |||
* 8x M4-0.7x12mm Button Head Socket Cap Screws for fastening the side panels to the main chassis | |||
== Online Resources == | == Online Resources == | ||