DEALOUR 13ic/83ic Series Servo Drives: Difference between revisions

← Older edit Newer edit →

@@ Line 22: / Line 22: @@
 * [https://www.cncwiki.org/images/5/58/DEALOUR_DO-13ic_and_DO-83ic_Absolute_Value_Series_Servo_Drive_Manual_V022400_English.pdf#page=9 Page 9] (1 in the PDF) shows the dimensions
+== Parameters ==
+* [https://www.cncwiki.org/images/5/58/DEALOUR_DO-13ic_and_DO-83ic_Absolute_Value_Series_Servo_Drive_Manual_V022400_English.pdf#page=53 Page 53] (45 in the PDF) shows the list of "PA mode" parameters
+* [https://www.cncwiki.org/images/5/58/DEALOUR_DO-13ic_and_DO-83ic_Absolute_Value_Series_Servo_Drive_Manual_V022400_English.pdf#page=58 Page 58] (50 in the PDF) shows the "detailed explanation" of the parameters
+== Alarm Codes ==
+* [https://www.cncwiki.org/images/5/58/DEALOUR_DO-13ic_and_DO-83ic_Absolute_Value_Series_Servo_Drive_Manual_V022400_English.pdf#page=73 Page 73] (65 in the PDF) shows the list of alarm codes
+* [https://www.cncwiki.org/images/5/58/DEALOUR_DO-13ic_and_DO-83ic_Absolute_Value_Series_Servo_Drive_Manual_V022400_English.pdf#page=74 Page 74] (66 in the PDF) has an alarm code troubleshooting guide
+== Modbus Control ==
+Parameters related to Modbus/RS-485:
+{| class="wikitable"
+! Name
+! Values
+! Default
+! Description
+|-
+| PA80
+| 1-32,767 (??? shouldn't it be 1-247?)
+| 1
+| Modbus Slave Address
+|-
+| PA81
+| <del>0: 4,800 baud</del> (documented, but not available)<br/>1: 9,600 baud<br/>2: 19,200 baud<br/>3: 38,400 baud<br/>4: ??? (undocumented)<br/>5: ??? (undocumented)
+| 2: 19,200 baud
+| Modbus Baud Rate
+|-
+| PA82
+| 0: odd<br/>1: even
+| 0: odd
+| Modbus Parity Type
+|}
+In all cases, the fame format is Modbus RTU (binary) with 1 start bit, 8 data bits, PA82 selected parity, and 1 stop bit.
 == Replacement Parts ==