JST JGD-125C Water Cooled Spindle: Difference between revisions
initial page creation |
added locknut information |
||
| Line 12: | Line 12: | ||
<pre>SKF E2 6004-2Z/C3 15 260 K</pre> | <pre>SKF E2 6004-2Z/C3 15 260 K</pre> | ||
=== Bottom Locknut === | |||
Doubles as a dust shield: | |||
* 56.7mm OD | |||
* 5.1mm thick (dust shield portion) | |||
* 4x 3.5mm holes 3mm deep on a 44mm diameter circle | |||
=== Top Locknut === | |||
* 32mm overall OD | |||
* 10mm thick | |||
* M20x1.0mm threads on the ID | |||
* 26mm OD / 22mm ID rim for bearing's inner shield | |||
* 1.8mm clearance around the rim for the bearing's shield, as well as a shoulder with no threads on the inside | |||
=== O-rings === | === O-rings === | ||