Cumark ES Series VFDs: Difference between revisions

Line 4:

Variable frequency drives made by Shenzen Cumark New Technology Co.,Ltd.

== Model Numbers ==

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=18 Page 18] (16 in the PDF) shows how to read the nameplate

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=37 Page 37] (35 in the PDF) shows the specifications based off model number

== Wiring Diagram ==

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=9 Page 9] (7 in the PDF) gives an abstract overview of the connections

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=10 Page 10] (8 in the PDF) shows a photo of the control/power terminals

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=13 Page 13] (11 in the PDF) shows the "F1" series wiring overview

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=14 Page 14] (12 in the PDF) shows the "F0" series wiring overview

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=24 Page 24] (22 in the PDF) shows the CANopen/Modbus communication RJ45 jack pinout

== Dimensions ==

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=16 Page 16] (14 in the PDF) shows the minimum clearance for mounting

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=17 Page 17] (15 in the PDF) shows the dimension table

* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=52 Page 52] (50 in the PDF) shows dimensional diagrams for the VFD as well as it's keypad

== Parameters ==

* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=49 Page 49] lists the parameters

== Alarm Codes ==

* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=163 Page 163] lists the fault codes

== Modbus control ==

* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=131 Page 131] lists the Modbus configuration parameters

* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=144 Page 144] shows the Modbus specific register addresses (not parameters)

* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=147 Page 147] discusses the Modbus protocol and supported function codes

* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=148 Page 148] gives the Modbus address to parameter address mapping

== PDFs ==

[[Media:Cumark_ES_350_580_850_Hardware_Manual.pdf]]

[[Media:Cumark_ES_350_580_850_Firmware_Manual.pdf]]

== Online Resources ==

Line 17:

Line 57:

[https://www.cumark.com.cn/en/down_view-7.html ES9000 High Voltage Variable Frequency Drive Selection Manual]

[https://www.cumark.com.cn/en/down-13.html Cumark ES350/580/850 Series Firmware Manual (Standard Control Procedure) (2017)]

[https://www.cumark.com.cn/en/down-12.html Cumark ES Series Cluster Driver Hardware Manual (2017)]

[https://www.cumark.com.cn/en/down-13.html Cumark ES350/580/850 Series Firmware Manual (Standard Control Procedure) (36010003, A.04, 2017-04-13)]

[https://parsdrive-co.com/wp-content/uploads/2020/04/parsdrive-inverter-catalog-ES350_580_850-firmware-manual.pdf Cumark ES350/580/850 Series Firmware Manual (Standard Control Procedure) (2017)] (mirror of above)

@@ Line 4: / Line 4: @@
 Variable frequency drives made by Shenzen Cumark New Technology Co.,Ltd.
+== Model Numbers ==
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=18 Page 18] (16 in the PDF) shows how to read the nameplate
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=37 Page 37] (35 in the PDF) shows the specifications based off model number
+== Wiring Diagram ==
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=9 Page 9] (7 in the PDF) gives an abstract overview of the connections
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=10 Page 10] (8 in the PDF) shows a photo of the control/power terminals
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=13 Page 13] (11 in the PDF) shows the "F1" series wiring overview
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=14 Page 14] (12 in the PDF) shows the "F0" series wiring overview
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=24 Page 24] (22 in the PDF) shows the CANopen/Modbus communication RJ45 jack pinout
+== Dimensions ==
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=16 Page 16] (14 in the PDF) shows the minimum clearance for mounting
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=17 Page 17] (15 in the PDF) shows the dimension table
+* [https://www.cncwiki.org/images/9/9c/Cumark_ES_350_580_850_Hardware_Manual.pdf#page=52 Page 52] (50 in the PDF) shows dimensional diagrams for the VFD as well as it's keypad
+== Parameters ==
+* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=49 Page 49] lists the parameters
+== Alarm Codes ==
+* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=163 Page 163] lists the fault codes
+== Modbus control ==
+* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=131 Page 131] lists the Modbus configuration parameters
+* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=144 Page 144] shows the Modbus specific register addresses (not parameters)
+* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=147 Page 147] discusses the Modbus protocol and supported function codes
+* [https://www.cncwiki.org/images/3/31/Cumark_ES_350_580_850_Firmware_Manual.pdf#page=148 Page 148] gives the Modbus address to parameter address mapping
+== PDFs ==
+[[Media:Cumark_ES_350_580_850_Hardware_Manual.pdf]]
+[[Media:Cumark_ES_350_580_850_Firmware_Manual.pdf]]
 == Online Resources ==
@@ Line 17: / Line 57: @@
 [https://www.cumark.com.cn/en/down_view-7.html ES9000 High Voltage Variable Frequency Drive Selection Manual]
-[https://www.cumark.com.cn/en/down-13.html Cumark ES350/580/850 Series Firmware Manual (Standard Control Procedure) (2017)]
+[https://www.cumark.com.cn/en/down-12.html Cumark ES Series Cluster Driver Hardware Manual (2017)]
+[https://www.cumark.com.cn/en/down-13.html Cumark ES350/580/850 Series Firmware Manual (Standard Control Procedure) (36010003, A.04, 2017-04-13)]
 [https://parsdrive-co.com/wp-content/uploads/2020/04/parsdrive-inverter-catalog-ES350_580_850-firmware-manual.pdf Cumark ES350/580/850 Series Firmware Manual (Standard Control Procedure) (2017)] (mirror of above)