CNC Wiki

WEIDE B2 Series Servo Drives: Difference between revisions

initial page creation
 
added replacement CN1 connector information
 
(4 intermediate revisions by the same user not shown)
Line 23: Line 23:


NOTE: CN3/CN4 have different pinouts between the serial and incremental encoder editions of the drives.
NOTE: CN3/CN4 have different pinouts between the serial and incremental encoder editions of the drives.
=== CN2 DE9 Edition ===
Meant for absolute serial encoders w/ battery backup:
{| class="wikitable"
! Pin No.
! Function
|-
| 1
| (shield)
|-
| 2
| +5V
|-
| 3
| 0V
|-
| 4
| A
|-
| 5
| B
|-
| 6
|
|-
| 7
|
|-
| 8
| BAT-
|-
| 9
| BAT+
|}


== Dimensions ==
== Dimensions ==


* [http://sevo.cn/upload/file_material/2021-04-14/1618365224b55d05ac7df1730c.pdf#page=10 Page 10] (7 in the PDF) shows the servo drive dimensions
* [http://sevo.cn/upload/file_material/2021-04-14/1618365224b55d05ac7df1730c.pdf#page=10 Page 10] (7 in the PDF) shows the servo drive dimensions
== Parameters ==
* [http://sevo.cn/upload/file_material/2021-04-14/1618365224b55d05ac7df1730c.pdf#page=50 Page 50] (47 in the PDF) has a parameter list
* [http://sevo.cn/upload/file_material/2021-04-14/1618365224b55d05ac7df1730c.pdf#page=62 Page 62] (59 in the PDF) has the parameter descriptions
== Alarm Codes ==
* [http://sevo.cn/upload/file_material/2021-04-14/1618365224b55d05ac7df1730c.pdf#page=107 Page 107] (104 in the PDF) has a list of the alarm codes
== Modbus Control ==
Parameters related to Modbus/RS-485:
{| class="wikitable"
! Parameter No.
! Values
! Default
! Description
|-
| 106
|
{| class="wikitable"
! Value
! Baudrate
|-
| 1
| 4,800 baud
|-
| 2
| 9,600 baud
|-
| 3
| 19,200 baud
|-
| 4
| 38,400 baud
|-
| 5
| 57,600 baud
|-
| 6
| 115,200 baud
|-
| other
| 9,600 baud
|}
| 2
| Modbus baud rate
|-
| 107
|
{| class="wikitable"
! Value
! Protocol
! Data Bits
! Stop Bits
! Parity
|-
| 0
| ASCII
| 8
| 2
| none
|-
| 1
| ASCII
| 8
| 1
| none
|-
| 2
| ASCII
| 8
| 1
| even
|-
| 3
| ASCII
| 8
| 1
| odd
|-
| 4
| ASCII
| 8
| 2
| even
|-
| 5
| ASCII
| 8
| 2
| odd
|-
| 6
| RTU
| 8
| 1
| none
|-
| 7
| RTU
| 8
| 1
| even
|-
| 8
| RTU
| 8
| 1
| odd
|-
| 9
| RTU
| 8
| 2
| odd
|}
| 6: RTU, 8 data bits, 1 stop bit, no parity
| Modbus Protocol
|-
| 108
| 0-247
| 1
| Modbus Slave Address
|}
== Replacement Parts ==
=== CN1 Connector ===
Cable side connector:
[https://www.digikey.com/en/products/detail/assmann-wsw-components/A-HDS-44-LL-Z/1241886 Assmann A-HDS 44 LL/Z] (male pins, solder cup)
[https://www.digikey.com/en/products/detail/adam-tech/DB25-HD-PB-SS/9832257 Adam Tech DB25-HD-PB-SS] (backshell)
=== CN3/CN4 Connectors ===
For the serial encoder / RS-485 jacks.
Cable side connector:
[https://www.digikey.com/en/products/detail/molex/0551000670/2405412 Molex 0551000670 | DigiKey]
[https://www.amazon.com/gp/product/B09KPRPMPP/ GELRHONR IEEE 1394 SM-6P Plug, 55100-0670 Male Connector JZSP-CMP9-1-E 6-Pin Encoder Plug, Suitable for 54280-0609 Yaskawa Panasonic Servo CN3 Connector | Amazon]
== Bill of Materials ==
=== Low Voltage Board ===
U2:
<pre>Geehy
APM32
F103VCT6
NSALP    A2
0143  2221</pre>
[https://www.lcsc.com/product-detail/Microcontroller-Units-MCUs-MPUs-SOCs_Geehy-APM32F103VCT6_C526182.html APM32F103VCT6 Geehy | C526182 - LCSC]
U6:
<pre>PANGO
PGC1KG
6CLPG100
HATC2102
AP2J341-C R1</pre>
[https://www.elnec.com/en/device/Pango/PGC1KG+%5BLPG100%5D%28SVF%29/ PGC1KG [LPG100](SVF) - Pango | Elnec]
[https://www.pangomicro.com/procenter/detail17.html Compact系列-产品中心-紫光同创]


== Online Resources ==
== Online Resources ==
Retrieved from "https://www.cncwiki.org/index.php?title=WEIDE_B2_Series_Servo_Drives"