Baldor M4000 Series DC Servo Motors: Difference between revisions

← Older edit

@@ Line 37: / Line 37: @@
 |}
-https://stevenengineering.com/Tech_Support/PDFs/92DC_SERVO_MOTORS.pdf#page=27
+https://stevenengineering.com/wp-content/uploads/2019/02/92DC_SERVO_MOTORS.pdf#page=27
 === 9-pin connector ===
@@ Line 75: / Line 75: @@
 |}
-https://stevenengineering.com/Tech_Support/PDFs/92DC_SERVO_MOTORS.pdf#page=27
+https://stevenengineering.com/wp-content/uploads/2019/02/92DC_SERVO_MOTORS.pdf#page=27
 === 11-pin connector ===
@@ Line 166: / Line 166: @@
 |}
-https://stevenengineering.com/Tech_Support/PDFs/92DC_SERVO_MOTORS.pdf#page=27
+https://stevenengineering.com/wp-content/uploads/2019/02/92DC_SERVO_MOTORS.pdf#page=27
 https://www.apexindustrialautomation.com/assets/globalparts/documents/Baldor_Reliance_MTE_4090_BLACE_Specification_Sheet.pdf#page=7 (gives a more detailed pinout)
@@ Line 207: / Line 207: @@
 [https://www.digikey.com/en/products/detail/amphenol-industrial-operations/MS3106E24-7S/4713132 Amphenol MS3106E24-7S]
+=== Brushes ===
+* overall length (with spring/copper braid straight): 1.67"
+* carbon brush width:0.372"
+* carbon brush thickness: 0.246"
+* carbon brush length: 0.626"
+* copper contact diameter: 0.438"
+* copper contact width (flat to flat): 0.332"
+* marked "E41" on the side of the carbon brush
+A compatible replacement:
+[https://www.helwigcarbon.com/shop/10-253721/ 10-253721 | Helwig Carbon Products, Inc.]
 == Online Resources ==
 [https://stevenengineering.com/Tech_Support/PDFs/92DC_SERVO_MOTORS.pdf Baldor DC Servo Motors & Drives Catalog]