Folinn H1 Series VFDs - Revision history

Fdarling: added more parameters to enable MODBUS timeout fault

2025-12-17T05:24:59Z

added more parameters to enable MODBUS timeout fault

@@ Line 336: / Line 336: @@
 | 1044: use P10.44 "communication timeout"
 | Comparator 1 input parameter selection
 |}

Fdarling: added parameters to enable MODBUS timeout fault

2025-12-17T05:02:15Z

added parameters to enable MODBUS timeout fault

@@ Line 307: / Line 307: @@
 | 2: communication (?)
 | Pause command source
 |}

Fdarling: added RS-485 RJ45 pinout table

2025-12-12T01:35:27Z

added RS-485 RJ45 pinout table

@@ Line 36: / Line 36: @@
 * [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=76 Page 76] (147 in the PDF) shows the H0201 interface panel screw / RJ45 / D-Sub? terminal pinout
-NOTE: they claim that pins 1&amp;2 on the RJ45 are RS-485+/-, but in reality it's reversed and pins 8&amp;7 are RS-485+/- and pins 2&amp;4 are GND.
+NOTE: <del>they claim that pins 1 &amp; 2 on the RJ45 are RS-485+/-</del>, but in reality it's reversed and pins 8 &amp; 7 are RS-485+/- and pins 1 &amp; 2 are +5V &amp; GND respectively.
 == Dimensions ==

Fdarling: added LinsVFD EV50 series manual page links

2025-11-30T21:20:19Z

added LinsVFD EV50 series manual page links

← Older revision		Revision as of 21:20, 30 November 2025
Line 18:		Line 18:

	== Model Numbers ==		== Model Numbers ==

			In the FoLinn H1 series manual:

	* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=6 Page 6] (7 in the PDF) shows the model number scheme		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=6 Page 6] (7 in the PDF) shows the model number scheme

			In the LinsVFD EV50 series manual:

			* [https://www.omc-stepperonline.com/index.php?route=product/product/get_file&file=3332/EV50_Series_Inverter_Full_User_Manual.pdf#page=6 Page 6] (7 in the PDF) shows the model number scheme

	== Wiring Diagram ==		== Wiring Diagram ==
Line 33:		Line 39:

	== Dimensions ==		== Dimensions ==

			In the FoLinn H1 series manual:

	* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=65 Page 65] (126 in the PDF) show a table of the dimensions		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=65 Page 65] (126 in the PDF) show a table of the dimensions

			In the LinsVFD EV50 series manual:

			* [https://www.omc-stepperonline.com/index.php?route=product/product/get_file&file=3332/EV50_Series_Inverter_Full_User_Manual.pdf#page=65 Page 65] (126 in the PDF) show a table of the dimensions

	== Parameters ==		== Parameters ==

Fdarling: added a link to the alarm/fault codes

2025-02-28T19:19:36Z

added a link to the alarm/fault codes

← Older revision		Revision as of 19:19, 28 February 2025
Line 154:		Line 154:
	\| Motor main reactance		\| Motor main reactance
	\|}		\|}

			== Alarm Codes ==

			* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=63 Page 63] (122 in the PDF) shows a list of fault codes

	== Modbus control ==		== Modbus control ==

Fdarling: updated PDF links to use wiki copy of PDF

2024-05-22T05:06:58Z

updated PDF links to use wiki copy of PDF

← Older revision		Revision as of 05:06, 22 May 2024
Line 19:		Line 19:
	== Model Numbers ==		== Model Numbers ==

	* [https://www.~~omc-stepperonline~~.~~com~~/~~download~~/~~H1_Series_Inverter_Full_User_Manual~~.pdf#page=6 Page 6] (7 in the PDF) shows the model number scheme		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=6 Page 6] (7 in the PDF) shows the model number scheme

	== Wiring Diagram ==		== Wiring Diagram ==

	* [https://www.~~omc-stepperonline~~.~~com~~/~~download~~/~~H1_Series_Inverter_Full_User_Manual~~.pdf#page=7 Page 7] (10 in the PDF) shows the power wiring		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=7 Page 7] (10 in the PDF) shows the power wiring
	* [https://www.~~omc-stepperonline~~.~~com~~/~~download~~/~~H1_Series_Inverter_Full_User_Manual~~.pdf#page=67 Page 67] (129 in the PDF) shows the H0101 interface panel screw terminal / RJ45 pinout		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=67 Page 67] (129 in the PDF) shows the H0101 interface panel screw terminal / RJ45 pinout
	* [https://www.~~omc-stepperonline~~.~~com~~/~~download~~/~~H1_Series_Inverter_Full_User_Manual~~.pdf#page=68 Page 68] (132 in the PDF) shows the H0110 interface panel screw terminal / RJ45 pinout		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=68 Page 68] (132 in the PDF) shows the H0110 interface panel screw terminal / RJ45 pinout
	* [https://www.~~omc-stepperonline~~.~~com~~/~~download~~/~~H1_Series_Inverter_Full_User_Manual~~.pdf#page=72 Page 72] (139 in the PDF) shows the H0100 interface panel screw terminal pinout		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=72 Page 72] (139 in the PDF) shows the H0100 interface panel screw terminal pinout
	* [https://www.~~omc-stepperonline~~.~~com~~/~~download~~/~~H1_Series_Inverter_Full_User_Manual~~.pdf#page=73 Page 73] (142 in the PDF) shows the H0200 interface panel screw / RJ45 / D-Sub? terminal pinout		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=73 Page 73] (142 in the PDF) shows the H0200 interface panel screw / RJ45 / D-Sub? terminal pinout
	* [https://www.~~omc-stepperonline~~.~~com~~/~~download~~/~~H1_Series_Inverter_Full_User_Manual~~.pdf#page=76 Page 76] (147 in the PDF) shows the H0201 interface panel screw / RJ45 / D-Sub? terminal pinout		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=76 Page 76] (147 in the PDF) shows the H0201 interface panel screw / RJ45 / D-Sub? terminal pinout

	NOTE: they claim that pins 1&2 on the RJ45 are RS-485+/-, but in reality it's reversed and pins 8&7 are RS-485+/- and pins 2&4 are GND.		NOTE: they claim that pins 1&2 on the RJ45 are RS-485+/-, but in reality it's reversed and pins 8&7 are RS-485+/- and pins 2&4 are GND.
Line 34:		Line 34:
	== Dimensions ==		== Dimensions ==

	* [https://www.~~omc-stepperonline~~.~~com~~/~~download~~/~~H1_Series_Inverter_Full_User_Manual~~.pdf#page=65 Page 65] (126 in the PDF) show a table of the dimensions		* [https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf#page=65 Page 65] (126 in the PDF) show a table of the dimensions

	== Parameters ==		== Parameters ==
Line 449:		Line 449:
	== Online Resources ==		== Online Resources ==

	[https://www.~~omc-stepperonline~~.~~com~~/~~download~~/~~H1_Series_Inverter_Full_User_Manual~~.pdf H1 Series Inverter User Manual (2021.V1.0)] (StepperOnline, no FoLinn mentioned)		[https://www.cncwiki.org/images/c/c1/FoLinn_H1_Series_Inverter_User_Manual.pdf H1 Series Inverter User Manual (2021.V1.0)] (StepperOnline, no FoLinn mentioned)

	[https://www.omc-stepperonline.com/download/H1_Series_Inverter_Easy_User_Manual.pdf H1 Series Inverter Simple Manual] (StepperOnline, no FoLinn mentioned)		[https://www.omc-stepperonline.com/download/H1_Series_Inverter_Easy_User_Manual.pdf H1 Series Inverter Simple Manual] (StepperOnline, no FoLinn mentioned)

Fdarling at 05:05, 22 May 2024

2024-05-22T05:05:24Z

← Older revision		Revision as of 05:05, 22 May 2024
Line 443:		Line 443:
	=== mbpoll ===		=== mbpoll ===

			== PDFs ==

			[[Media:FoLinn_H1_Series_Inverter_User_Manual.pdf]]

	== Online Resources ==		== Online Resources ==

	[https://www.omc-stepperonline.com/download/H1_Series_Inverter_Full_User_Manual.pdf H1 Series Inverter User Manual (2021.V1.0)] (StepperOnline)		[https://www.omc-stepperonline.com/download/H1_Series_Inverter_Full_User_Manual.pdf H1 Series Inverter User Manual (2021.V1.0)] (StepperOnline, no FoLinn mentioned)

	[https://www.omc-stepperonline.com/download/H1_Series_Inverter_Easy_User_Manual.pdf H1 Series Inverter Simple Manual] (StepperOnline)		[https://www.omc-stepperonline.com/download/H1_Series_Inverter_Easy_User_Manual.pdf H1 Series Inverter Simple Manual] (StepperOnline, no FoLinn mentioned)

	[https://www.omc-stepperonline.com/index.php?route=product/product/get_file&file=3332/EV50_Series_Inverter_Full_User_Manual.pdf LinsVFD EV50 Series Inverter Full User Manual] (LinsVFD on StepperOnline)		[https://www.omc-stepperonline.com/index.php?route=product/product/get_file&file=3332/EV50_Series_Inverter_Full_User_Manual.pdf LinsVFD EV50 Series Inverter Full User Manual] (LinsVFD on StepperOnline, no FoLinn mentioned)

	[https://www.omc-stepperonline.com/index.php?route=product/product/get_file&file=3332/EV50_Series_Inverter_Easy_User_Manual.pdf LinsVFD EV50 Series Inverter Easy User Manual] (LinsVFD on StepperOnline)		[https://www.omc-stepperonline.com/index.php?route=product/product/get_file&file=3332/EV50_Series_Inverter_Easy_User_Manual.pdf LinsVFD EV50 Series Inverter Easy User Manual] (LinsVFD on StepperOnline, no FoLinn mentioned)

	[https://www.chinafolinn.com/uploads/image/20201021/5f8f9c43a68b0.pdf H1 Series Inverter Simple Manual (2020.10.21)] (Folinn)		[https://www.chinafolinn.com/uploads/image/20201021/5f8f9c43a68b0.pdf H1 Series Inverter Simple Manual (2020.10.21)] (Folinn)

Fdarling: added another StepperOnline link

2024-05-15T04:01:03Z

added another StepperOnline link

← Older revision		Revision as of 04:01, 15 May 2024
Line 450:		Line 450:

	[https://www.omc-stepperonline.com/download/H1_Series_Inverter_Easy_User_Manual.pdf H1 Series Inverter Simple Manual] (StepperOnline)		[https://www.omc-stepperonline.com/download/H1_Series_Inverter_Easy_User_Manual.pdf H1 Series Inverter Simple Manual] (StepperOnline)

			[https://www.omc-stepperonline.com/index.php?route=product/product/get_file&file=3332/EV50_Series_Inverter_Full_User_Manual.pdf LinsVFD EV50 Series Inverter Full User Manual] (LinsVFD on StepperOnline)

			[https://www.omc-stepperonline.com/index.php?route=product/product/get_file&file=3332/EV50_Series_Inverter_Easy_User_Manual.pdf LinsVFD EV50 Series Inverter Easy User Manual] (LinsVFD on StepperOnline)

	[https://www.chinafolinn.com/uploads/image/20201021/5f8f9c43a68b0.pdf H1 Series Inverter Simple Manual (2020.10.21)] (Folinn)		[https://www.chinafolinn.com/uploads/image/20201021/5f8f9c43a68b0.pdf H1 Series Inverter Simple Manual (2020.10.21)] (Folinn)
Line 455:		Line 459:
	[https://www.chinafolinn.com/uploads/image/20200602/5ed61f05888f9.pdf H1 Series Compact Inverter Brochure (2020.06.02)] (Folinn)		[https://www.chinafolinn.com/uploads/image/20200602/5ed61f05888f9.pdf H1 Series Compact Inverter Brochure (2020.06.02)] (Folinn)

	https://cononmotor.com.au/wp-content/uploads/2022/05/2.29.182-H1-Detailed-Manual-%E8%8B%B1%E6%96%87%E7%89%88%E8%AF%A6%E7%BB%86%E8%AF%B4%E6%98%8E%E4%B9%A61.pdf		[https://cononmotor.com.au/wp-content/uploads/2022/05/2.29.182-H1-Detailed-Manual-%E8%8B%B1%E6%96%87%E7%89%88%E8%AF%A6%E7%BB%86%E8%AF%B4%E6%98%8E%E4%B9%A61.pdf 2.29.182-H1-Detailed-Manual-英文版详细说明书1.pdf]

			[https://cononmotor.com.au/wp-content/uploads/2020/03/H1-Simple-User-Manual-Revised.pdf H1-Simple-User-Manual-Revised.pdf]

	https://~~cononmotor~~.com~~.au~~/~~wp-content/uploads/2020/03/H1-Simple-User-Manual-Revised.pdf~~		[https://www.omc-stepperonline.com/linsvfd LinsVFD Variable Frequency Drives] (now LinsVFD branded instead of StepperOnline nor FoLinn?)

	[https://www.omc-stepperonline.com/h100-series-vfd-variable-frequency-drive H100 Series VFD Variable Frequency Drive]		[https://www.omc-stepperonline.com/h100-series-vfd-variable-frequency-drive H100 Series VFD Variable Frequency Drive]

Fdarling at 04:30, 10 October 2023

2023-10-10T04:30:29Z

← Older revision		Revision as of 04:30, 10 October 2023
Line 35:		Line 35:

	* [https://www.omc-stepperonline.com/download/H1_Series_Inverter_Full_User_Manual.pdf#page=65 Page 65] (126 in the PDF) show a table of the dimensions		* [https://www.omc-stepperonline.com/download/H1_Series_Inverter_Full_User_Manual.pdf#page=65 Page 65] (126 in the PDF) show a table of the dimensions

			== Parameters ==

			{\| class="wikitable"
			! Parameter No.
			! Default Value
			! Range
			! Description
			\|-
			\| P02.18
			\| 50.000 Hz
			\| 0.000 - 99999.000 Hz
			\| Maximum setting value
			\|-
			\| P02.19
			\| 0.000 Hz
			\| 0.000 - 99999.000 Hz
			\| Minimum setting value
			\|-
			\| P02.50
			\|
			\| 0.050 - 3600.000 s
			\| Acceleration time 0
			\|-
			\| P02.70
			\|
			\| 0.050 - 3600.000 s
			\| Deceleration time 0
			\|-
			\| P05.08
			\| 55.000 Hz
			\| -1020.000 - 1020.000 Hz
			\| Motor upper frequency limit
			\|-
			\| P06.00
			\|
			\| 0: off<br/>1: complete<br/>2: simple
			\| Motor parameter self-learning
			\|-
			\| P06.10
			\| 0: asynchronous
			\| 0: asynchronous<br/>1: surface mount permanent magnet synchronous<br/>2: salient pole permanent magnet synchronous<br/>4: single-phase motor
			\| Motor type
			\|-
			\| P06.05
			\|
			\| 2-16 kHz
			\| Carrier frequency
			\|-
			\| P06.11
			\|
			\| 0.000 - 100000.000 kW
			\| Motor rated power
			\|-
			\| P06.12
			\|
			\| 0 - 1000 V
			\| Motor rated voltage
			\|-
			\| P06.13
			\|
			\| 1 - 3000 Hz
			\| Motor rated frequency
			\|-
			\| P06.14
			\|
			\| 0.00 - 1000.00 A
			\| Motor rated current
			\|-
			\| P06.15
			\|
			\| 10 - 65535 RPM
			\| Motor rated speed
			\|-
			\| P06.16
			\|
			\| 0.00 - 1.00 (ratio)
			\| Motor power factor
			\|-
			\| P06.17
			\|
			\| 2 - 100 poles (not pairs)
			\| Motor pole count
			\|-
			\| P06.18
			\|
			\| 0.1 - 10000.0 Nm
			\| Motor rated torque
			\|-
			\| P06.19
			\|
			\| 0.00 - 1000.00 A
			\| Motor no-load current
			\|-
			\| P06.20
			\|
			\| 1.000 - 10000.000 mV/RPM
			\| PM motor back EMF/rev
			\|-
			\| P06.40
			\|
			\| 0.000 - 99.990 ohms
			\| Stator impedance
			\|-
			\| P06.41
			\|
			\| 0.000 - 99.990 ohms
			\| Rotor impedance
			\|-
			\| P06.42
			\|
			\| 0.000 - 999.990 mH
			\| Stator leakage reactance
			\|-
			\| P06.44
			\|
			\| 0.00 - 999.90 mH
			\| Motor main reactance
			\|}

	== Modbus control ==		== Modbus control ==

Fdarling: added MODBUS register address scheme notes

2023-09-16T04:21:31Z

added MODBUS register address scheme notes

← Older revision		Revision as of 04:21, 16 September 2023
Line 312:		Line 312:
	\|-		\|-
	\| P10.90		\| P10.90
	\| ~~0x8121~~		\| 0x0441
	\| -999999.000 - 999999.000 %		\| -999999.000 - 999999.000 %
	\|		\|
	\| Set value 1		\| Set value 1
	\|}		\|}

			NOTE: you add 0x4000 (16,384) to the addresses to go from 16-bit mode to 32-bit mode

			NOTE: you add 0x8000 (32,768) to the addresses to go from EEPROM to RAM access (important when writing frequently over MODBUS!)

	=== mbpoll ===		=== mbpoll ===